The Radian 2216 15” low frequency
transducer produces
extremely high levels of bass
energy. This woofer is designed
as an extended low frequency
device, used as a subwoofer or
general purpose LF transducer.
Notably this transducer will perform
very well in a 4.5 cubic
foot enclosure.
Integral to this design is a
composite ribbed cone, reinforced
with Kevlar®. The voice
coil is edge wound aluminum
for better transient response,
however our advanced adhesives
give it the power handling
capacity of more conventional
copper voice coils. With 600
watts RMS power handling and
a high-energy magnetic structure
with a venturi cross section
to increase ventilation efficiency,
the output sensitivity is 96 dB
(one watt, one meter) with a
continuous sound pressure level
of 124 dB.
Low
Distortion
4"
Voice Coil
Kevlar®
Impregnated Cone
Venturi-Vented
Cooling
600
Watts RMS
Cast
Aluminum Frame
High
Sensitivity
Specifications
FREQUENCY
RESPONSE
45 Hz – 3.5 kHz
MAXIMUM
POWER HANDLING*
600 watts RMS
SENSITIVITY**
96 dB
RECOMMENDED
CROSSOVER
90 - 300 Hz
NOMINAL
IMPEDANCE
8 ohms
VOICE
COIL DIAMETER
4.0" (101.6mm)
RECOMMENDED
ENCLOSURE
4 ft³ - 6 ft³ (113 -
170 liters)
WOOFER
CONE MATERIAL
Kevlar® Reinforced Paper
VOICE
COIL MATERIAL
Edgewood Aluminum
BASKET
MATERIAL
Cast Aluminum
OVERALL
DIAMETER
15.25" (387.325mm)
MOUNTING
BOLT CIRCLE
14.56" (369.87mm)
CUT-OUT
DIAMETER
14.00" (355.0mm)
OVERALL
DEPTH
6.125" (155.56mm)
INPUT
CONNECTORS
Pushbutton Terminals
WEIGHT
25.04 lbs. (11.36 kg)
THIELE/SMALL
PARAMETERS:
QTS
0.3747
QMS
2.949
QES
0.4292
VAS
(FT³)
6.5 (183.888 liters)
FS
(Hz)
38.7
XMAX
(IN)
0.187
RE
()
6.2
SD
(IN²)
128.9 (0.0832m²)
*EIA Standard
RS-426A
**One watt at one meter (averaged
100 Hz - 800 Hz)
Amplitude vs. Frequency Response of the Radian 2216 as measured on axis with
a one watt (2.83 Vrms), swept sine wave input at 8 ohms, in a 4.5 (ft³) vented
enclosure tuned to 46 Hz.